Custom Color Black FFP2 Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Mask

Product Namekn95 maskColorWhiteSize16*13.5cm(Customizable)Material qualityHigh efficiency electrostatic filter material.Product functionDustproof, haze proof, PM2.5 proof, etc.Storage methodSealed, Normal Temperature, Dry, Avoid Sunlight Preservation.Ear belt type.1,Facing the face of the mask without nose clip, hold one ear ban

Featured Products

Product Namekn95 mask
ColorWhite
Size16*13.5cm(Customizable)
Material qualityHigh efficiency electrostatic filter material.
Product functionDustproof, haze proof, PM2.5 proof, etc.
Storage methodSealed, Normal Temperature, Dry, Avoid Sunlight Preservation.

Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Ear belt type.
1,Facing the face of the mask without nose clip, hold one ear band with both hands, so that the nose clip is located above the mask.
2,Put the mask over your chin.
3,After pulling the ear strap to the ear, adjust the ear strap to feel as comfortable as possible.
4,Place both hands and fingers in the middle of the metal nose clip, press inward while moving fingers to both sides along the nose clip Tip until the nose clip is fully pressed into the shape of the bridge of the nose. Using only one hand to hold the mask nose clip may affect the mouth Tightness of cover.
5,Before entering the work area, the user must check the tightness between the mask and the face:
a) Cover the mask with both hands to avoid affecting the position of the mask on the face.
b) If the mask has no exhalation valve, exhale rapidly; if the mask has exhalation valve, inhale rapidly.
c) If the air leaks from the bridge of the nose, readjust the nose clamp according to step 4; if the air leaks from the edge of the mask,The headband should be readjusted;If a good seal cannot be obtained, repeat steps 1-4.
d) If no leakage is felt, you can enter the work area to work.

Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque
Headband.
1,Face the face of the mask without nose clip, so that the nose clip is located above the mask. Hold the mask on your face with your hands, Put the mask against your chin.
2,Pull the top headband over your head and place it over your head.
3,Pull the lower square head belt over the top of the head and place it under the back of the neck and ears.
4,Place both hands and fingers in the middle of the metal nose clip, press inward while moving fingers to both sides along the nose clip Tip until the nose clip is fully pressed into the shape of the bridge of the nose. Using only one hand to hold the mask nose clip may affect the mouth Tightness of cover.
5,Before entering the work area, the user must check the tightness between the mask and the face:
a) Cover the mask with both hands to avoid affecting the position of the mask on the face.
b) If the mask has no exhalation valve, exhale rapidly; if the mask has exhalation valve, inhale rapidly.
c) If the air leaks from the bridge of the nose, readjust the nose clamp according to step 4; if the air leaks from the edge of the mask, The headband shall be readjusted; if the good sealing cannot be achieved, steps 1-4 shall be repeated.
d) If no leakage is felt, you can enter the work area to work.
 

 

Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque

Hannai Tianjin Biotechnology Co., Ltd. is a professional health care and beauty care patch pad manufacturer,wholesaler and exporter. Its predecessor is Tianjin Huasheng Zhongtian Biotechnology Development Co., Ltd. which has been established for nearly 10 years. And area is 5000 square meters, and it is expected to be put into operation in Hebei Province in 2018 with an area of 15,000 square meters. Since foundation in 2009, we insist on the company culture of Co-development with customers,ensuring the stable quality and maintaining the competitiveness of our customers and all staff member benefits.Our main product include detox foot patches, air-activated warmers (adhesive heat packs, hand warmers, foot warmers), Chinese slim patches, moxa patches, pain relief patches, medical pads, plasters, crystal eye masks,hip up patches, etc.With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in hospital,clinics and family.Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.Our production techniques, quality and management skills unceasingly continue to grow and develop.There are sixteen patents, seventy-six utility model patents, and fifteen trademarks.We have the modern workshop and advanced medical glue coating line and other medical equipments.We have 6 different lines of factories with over 200 skilled workers, 10 technical engineers ,1 independent labs and more than 30 e-commerce teams.Our company will consistent our tenet:all work for customer standard.Try to produce more high quality products,in order to requite stable and new customers.We looking forward hear from your any question!
Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque


Custom Colored Black FFP2 Face Mask Valve Pm2.5 Filter Mascara OEM Factory Wholesale Masque

FAQ


1, Are you a factory or trading company ?
We are an integrated company of industry and trade,and we have nearly 10 year production experience for Chinese plaster and patch, can offer best quality product and reasonable price for you.

2,What is your main products?
Our main products contain all kinds of foot patch, body patch,pain relief patch,slim patch,hand mask,foot mask,collagen
masks,warmer patch and more .

3,How is your service quality?
We provides 24-hour online q&a. Fast delivery service after payment confirmation and After-sales service.

4,How about your Inspection & Packaging?
We will do inspection before packaging. Standard Export Packaging.

5,Why we choose you? What is your strength?
We have professional services and many year of experience in the production of biological patches.We spend more time commuicating with you and more energy on the design and manufacture of each product.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours